Amp Modifications | Custom Instrument and Patch Cables | Pro Audio Cables | Custom Neck LED Inlays | Sanding, Jointing, and Planing | Painting and Screen Printing | Bursts | Staining and Instrument Lacquer
CNC: Custom Cut Bodies & Necks #
Yes, we can import your instrument designs, and call it your own! Our CNC cuts at a rate of 600 inches a minute. You can design your own instrument in Adobe Illustrator, or use InkScape for free. You can then upload your files to our cloud account and then we can import your design into our system. We then create the tool paths necessary for our CNC to cut out your instrument.
We run V Carve Pro for creating the tool paths needed and afterwards, we send it to the CNC for cutting. Of course, we have a setup charge for creating your tool cut profile, and we handle changing bits after passes. But, once your instrument is cut, it is then shipped raw to you for your inspection.
Then when you are happy with the roughing, the instrument then goes into the process of sanding & finishing. After the finish is applied and ready to be fitted, assembly and setup can begin. Whether you build and finish the instrument yourself, we can help with every stage of your custom built instrument.
We can also assist with a variety of woodworking processes, please inquire with the technician. Our shop’s woodworking hourly rate is charged ($45/hr.) and is charged in intervals of 15 minutes. Minimum Shop Woodwork Charge ($30) applies for any woodwork of less than 15 minutes.
Amp Modifications #
We can assist in repairing, cleaning, rewiring, reviving, or revamping your old Amp with new tubes. In the advent of a repair that is out of our league, we can assist in finding a reputable third-party repair source that specifically specializes in such a repair. Such times can call for even greater costs per hour out of our control, but we will always be up front. If its out of our forte, we will let you know. We warranty all our work, and we know when something is above our heads.
Charged per hour at our Shop Bench Rate of $60 /hr and in intervals of 15 minutes. Our Minimum Bench Charge is $30.00
Tube Replacement
Transformer Replacement
Input/Output Replacements [TS/TRS/XLR/AES]
Pot Cleaning
Pot Replacements
Amp Rewire
Amp Internal Cleaning
Custom Instrument and Patch Cables #
Nothing beats having quality cables and connectors that can be easily repaired and last for years. If not, your whole life! We carry both Switchcraft, and Neutrik connectors. They are both industry standards for connectors, inputs/outputs of all types, and kinds.
Along with the high end cabling to match them. We carry Mogami for the demand, and Redco for the house at a much lower price, that compares very close to each other.
We can solder any length, or type of connection you want, or need! Contact us for custom lengths, or a complete re-wiring of your pedalboard, amps, patchbay and more. Our storefront has pre-made standard lengths. But, you can reach out anytime for custom lengths, and configurations.
Pro Audio Cables #
$2.50 per solder lead end TS
$3.00 per solder lead end TRS/XLR/TT/AES
$4.00 per solder lead end MIDI
Special Cable Soldering Rate: $40/hour plus parts and cable.
Connectors
==========
Switchcraft TS/TRS Connectors $8 each
Neutrik TS/TRS Connectors $8 each
Cabling
=======
Mogami [Mogami W2524] Unbalanced Instrument Cable $5 foot
Mogami [Mogami W2319] Miniature Unbalanced Instrument Cable $5 foot
House Unbalanced Instrument Cable $3 foot
Custom Neck LED Inlays #
Yes, as the title implies. We can install LED’s in your fingerboard inlay dots, or anywhere! This can involve with separating the fingerboard from the neck, or routing a channel on the back of the neck. If routed from the back of the neck, it is done offset from the truss rod, and new wood is cut to fill the channel. Then smoothed down, finish applied and ready to glow!
Charged at $45 per hour for our Woodworking Shop Rate.
Minimum Shop Charge $30.00 of less than 15 minutes.
Parts are not included to perform this service.
Sanding, Jointing, and Planing #
We can assist with any sanding, jointing, or planing charged at our shop woodwork rate, and is charged per hour in intervals of 15 minutes.
Minimum bench fee applies for woodwork of less than 15 minutes.
Painting and Screen Printing #
Not including disassembly, re-assembly, nut, setup, or strings.
Customer supplied strings are okay.
Paint & Clear Coat Guitar/Bass Bodies starting at $225
Paint & Clear Coat Guitar/Bass Necks starting at $175
Screen Print Front Guitar/Bass Bodies starting at $150
---> Screen setup & color seperation included
---> Designs/Art not included
---> Direct import of your file/s
---> Press up to 6 colors
---> Screen printing pickups add $80
---> Screen printing headstock add $90
Bursts #
Not including disassembly, re-assembly, nut, setup, or strings.
Customer supplied strings are okay.
Guitar/Bass Bodies starting at $185
---> Includes dye and lacquer
Staining and Instrument Lacquer #
Not including disassembly, re-assembly, nut, setup, or strings.
Customer supplied strings are okay.
Guitar/Bass Bodies starting at $185
---> Includes staining and lacquer
Instrument Bodies starting at $140
---> Includes light sanding and instrument lacquer